L. J. Zheng, M. L. Wang, D. H. Kang, N. K. Kim, K. Gao, W. Lee, H. W. Kang, "Janus membrane with heterogeneous wettability top surface for fog harvesting", Applied Surface Science, 669, 1160508, 2024

D. H. Kang, L. J. Zheng, S. Lee, S. Han, H. W. Kang, "Accelerating water collection cycle by surface energy gradient of micro hole pattern on composite nanofiber membrane", Colloids and Surfaces A: Physicochemical and Engineering Aspects, 696, 134325. 2024

N. Lingappan, S. Lim, G. H. Lee, V. H. Luan, I. Jeon, H. W. Kang, W. Lee, "Carbon triple-junction nanostructures for solid-state stretchable and flexible fabric/yarn-type symmetric supercapacitors", Journal of Energy Storage, 83, 110733, 2024

M. L. Wang, L. J. Zheng, H. W. Kang​, "3-Dimenional conformal cooling channel design: Origami-inspired topology optimization approach", Applied Thermal Engineering, 242, 122526, 2024​

G. H. Lee, N. Lingappan, H. W. Kang, I. Jeon, W. Lee, "Three-dimensional nanostructures of crosslinked aramid nanofibers with exceptional mechanical and thermal insulation characteristics", Applied Surface Science, 660, 159993, 2024

N. C. Adak, G.H. Lee, H. T. Tung, S. M. Lim, N. Lingappan, H. W. Kang, W. O. Lee, "Superior high-temperature mechanical and thermal performance of carbon fiber/epoxy composites by incorporating highly dispersed aramid nanofibers", Applied Materials Today, 35, 101956, 2023

N. K. Kim, D. H. Kang, B. W. Kim, H. W. Kang, "Optimal location and performance prediction of portable air cleaner in composite room shapes using convolutional neural network," Building and Environment, 110500, 2023.

M. L. Wang, L. J. Zheng, S. Bae, H. W. Kang, "Comprehensive Performance Enhancement of Conformal Cooling Process using Thermal-Load-based Topology Optimization," Applied Thermal Engineering, 120332, 2023.

H. Eom, S. Ahn, N. K. Kim, H. W. Kang, "Thermal Catalytic Device for Toluene Decomposition via Direct Heating," Environmental Engineering Research, 2022.

N. K. Kim, D. H. Kang, H. W. Kang, "Prediction of Air Exchange Performance of an Air Purifier by Installation Location using Artificial Neural Network," Journal of the Korea Society of Visualization, 20, 21-27, 2022.

H. T. Tung, G. H. Lee, V. H. Luan, S. Lim, H. W. Kang, W. Lee, "Highly Dispersed Aramid Nanofiber-reinforced Epoxy Nanocomposites by the Sequential Solvent-exchange Method," Advanced Composite Materials, 1-18, 2022.

N. K. Kim, D. H. Kang, W. Lee, H. W. Kang, “Removal Efficiency of PM10 via Ventilation with Residential Exhaust Hood and Conditions for Reducing Human Intake Fraction,” Environmental Modeling & Assessment, 27(3), 461-472, 2022.

L. J. Zheng, H. W. Kang, “A Passive Evaporative Cooling Heat Sink Method for Enhancing Low-grade Waste Heat Recovery Capacity of Thermoelectric Generators,” Energy Conversion and Management, 251, 114931, 2022.

N. K. Kim, D. H. Kang, W. Lee, H. W. Kang, “Airflow Pattern Control using Artificial Intelligence for Effective Removal of Indoor Airborne Hazardous Materials,” Building and Environment, 204, 108148, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “VEGF Detection via Simplified FLISA using a 3D Microfluidic Disk Platform,” Biosensors, 11, 270, 2021.

J. H. Kim, B. Kim, S. W. Kim, H. W. Kang, M. C. Park, D. H. Park, B. K. Ju, W. K. Choi, “High-performance Coaxial Piezoelectric Energy Generator (C-PEG) Yarn of Cu/PVDF-TrFE/PDMS/Nylon/Ag,” Nanotechnology, 32, 145401, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “Electrostatic Charge Retention in PVDF Nanofiber-Nylon Mesh Multilayer Structure for Effective Fine Particulate Matter Filtration for Face Masks,” Polymers, 13, 3235, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “Hybrid Structure of a ZnO Nanowire Array on a PVDF Nanofiber Membrane/Nylon Mesh for use in Smart Filters: Photoconductive PM Filters,” Applied Sciences, 11, 8006, 2021.

Y. J. Youn, C. K. Lee, N. Shikazono, H. W. Kang, “Theoretical and Experimental Study on Liquid Film Thicknesses of Unsteady Slug Flows in a Capillary Tube,”International Journal of Multiphase Flow, 134, 103470, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “3D-inertia Valve Component for Centrifugal Force-based Micro Fluid Control,” Journal of the Korean Society of Visualization, 19, 12-17, 2021.

L. J. Zheng, S. M. Lim, N. K. Kim, D. H. Kang, Y. J. Youn, W. Lee, H. W. Kang, “Experimental Study of a Thin Water-film Evaporative Cooling System to Enhance the Energy Conversion Efficiency of a Thermoelectric Device,” Energy, 211, 119040, 2020.

S. M. Lim, J. H. Han, H. W. Kang, J. U. Lee, W. Lee, “Preparation of Electrochemically Exfoliated Graphene Sheets using DC Switching Voltages,” Carbon Letters, 30, 409-416, 2020.

D. H. Kang, N. K. Kim, S. W. Park, W. Lee, H. W. Kang, “Microfluidic Circuit Consisting of Individualized Components with Slope Valve for High Accuracy Biochemical Detection,” Lab on a Chip, 20, 4433-4441, 2020.

V. H. Luan, J. H. Han, H. W. Kang, W. Lee, “Ultra-sensitive Non-enzymatic Amperometric Glucose Sensors based on Silver Nanowire/graphene Hybrid Three-dimensional Nanostructures,” Results in Physics, 15, 102761, 2019.

V. H. Luan, J. H. Han, H. W. Kang, W. Lee, “Highly Porous and Capacitive Copper Oxide Nanowire/graphene Hybrid Carbon Nanostructure for High-performance Supercapacitor Electrodes,” Composites Part B: Engineering, 178, 107464, 2019.

L. J. Zheng, D. H. Kang, N. K. Kim, Y. J. Youn, H. W. Kang, “Theoretical Analysis of Natural Evaporative Cooling to Enhance the Efficiency of Thermoelectric Devices,” International Journal of Heat and Mass Transfer, 143, 118512, 2019.

D. H. Kang, N. K. Kim, H. W. Kang, “High Efficient Photo Detector by using ZnO Nanowire Arrays on Highly Aligned Electrospun PVDF-TrFE Nanofiber Film,” Nanotechnology, 30, 365303, 2019.

C. W. Bak, H. W. Kang, C. Y. Lee, D. Y. Jeong, H. J. Eom, “Laser Irradiation Synthesis and Photocatalytic Properties of TiO2-SiO2 Hybrid Thin Films,” Thin Soild Films, 678, 31-41, 2019.

N. K. Kim, D. H. Kang, H. J. Eom, H. W. Kang, “Biomimetic Fog Harvesting Surface by Photo Induced Micro-patterning of Zinc-oxide Silver Hierarchical Nanostructures,” Applied Surface Science, 470, 161-167, 2019.

N. K. Kim, D. H. Kang, H. W. Kang, “Unevenness of Thin Liquid Layer by Contact Angle Variation of Substrate during Coating Process,” Coatings, 9, 162, 2019.

G. H. Lee, V. H. Luan, J. H. Han, H. W. Kang, W. Lee, “Enhancement of Electrochemical and Mechanical Properties of 3D Graphene Nanostructures by Dopamine-coating,” Composites Research, 32, 388-394, 2019.

N. K. Kim, Y. H. Choi, H. W. Kang, “Numerical Analysis on Exhaust Performance of Fine Particulate Matter 10 in the Chimney Type Range Hood,” Transactions of the Korean Society of Mechanical Engineers B, 42, 313-318, 2018.

D. H. Kang, H. W. Kang, “Advanced Electrospinning using Circle Electrodes for Freestanding PVDF Nanofiber Film Fabrication,” Applied Surface Science, 455, 251-257, 2018.

B. Y. Wang, E. S. Lee, D. S Lim, H. W. Kang, Y. J. Oh, "A Silver Nanowire Mesh Overcoated with Graphene Oxide as a Transparent Electrode for Flexible Organic Solar Cells," RSC Advances, 7, 52914-52922, 2017.

B. Y. Wang, E. S. Lee, D. S Lim, H. W. Kang, Y. J. Oh, "Roll-to-Roll Slot Die Production of 300-mm Large Area Silver Nanowire Mesh Films for Flexible Transparent Electrode," RSC Advances, 7, 7540-7546, 2017.

D. H. Kang, N. K. Kim, H. W. Kang, “Water Absorption Property of Zeolite Embedded PVDF Film Fabricated by Electrospinning Method,” Transactions of the Korean Society of Mechanical Engineers B, 42, 373-377, 2017.

D. H. Kang, H. W. Kang, "Surface Energy Characteristics of Zeolite embedded PVDF Nanofiber Films with Electrospinning Process," Applied Surface Science, 387, 82-88, 2016.

H. M. Kim, H. W. Kang, D. K. Hwang, H. S, Lim, B. K. Ju, J. A. Lim, "Metal-Insulator-Semiconductor Coaxial Microfiber based on Self-organization of Organic Semiconductor: Polymer Blend for Weavable, Fibriform Organic Field-Effect Transistor,"  Advanced Functional Materials, 26, 2706-2714, 2016.

T. H. Yoo, B. I. Sang, B. Y. Wang, D. S. Lim, H. W. Kang, W. K. Choi, Y. T. Lee, Y. J. Oh, and D. K. Hwang, "Metal-oxide Thin-film Transistor-based pH Sensor with a Silver Nanowire Top Gate Electrode," Journal of The Korean Physics Society, 68, 901-907, 2016.

H. W. Kang, H. Lee, H. J. Sung, "Direct Patterning of ZnO Thin Flim Transistor using Physical Vapor Jet Printing," Materials Letters, 163, 165-170, 2016.

H. W. Kang, J. Y. Leem, H. J. Sung, "​Photoinduced Synthesis of Ag Nanoparticles on ZnO Nanowires for Real-time SERS Systems", RSC Advances, 5, 51-57, 2015

S. Han, S. Hong, H. W. Kang, M. Wanit, B. Kang, S. H. Ko, "Hybrid Subtractive Micropatterning of a Self-assembled SiO2 Nano Microsphere Monolayer,"  Journal of Micromechanics and Microengineering, 25, 105006, 2015.

H. W. Kang, J. Leem, S. Y. Yoon, H. J. Sung, "Continuous Synthesis of Zinc Oxide Nanoparticles in a Microfluidic System for Photovoltaic Applications," Nanoscale, 6, 2840-2846, 2014.

H. W. Kang, J. Leem, S. H. Ko, H. J. Sung, "Controllable Ag Nanostructure Patterning in a Microfluidic Channel for Real-time SERS System," Nanoscale, 6, 2895-2901, 2014.

Y. S. Oh, D. Y. Choi, J. Y. Son, B. Y. Kim, H. W. Kang, C. B. Chang, J. T. Moon, H. J. Sung, "Breakup Behavior of a Molten Metal Jet," Journal of Heat and Fluid Flow, 50, 27-37, 2014.

J. Yeo, G. Kim, S. Hong, M. S. Kim, D. Kim, J. Lee, H. B. Lee, J. Kwon, Y. D. Suh, H. W. Kang, H. J. Sung, J. H. Choi, W. H. Hong, J. M. Ko, S. H. Lee, S. H. Choa, S. H. Ko, "Flexible Supercapacitor Fabrication by Room Temperature Rapid Laser Processing of Roll-to-Roll Printed Metal Nanoparticle Ink for Wearable Electronics Application," Journal of Power Source, 246, 562-568, 2014.

H. W. Kang, J. Leem, S. H. Ko, S. Y. Yoon, H. J. Sung, "Vacuum-Assisted Microcontact Printing (μCP) for Aligned Patterning of Nano and Biochemical Materials," Journal of Materials Chemistry C, 1, 268-274, 2013.

S. Hong, J. Yeo, W. Manorotkul, H. W. Kang, J. Lee, S. Han, Y. Rho, Y. D. Suh, H. J. Sung, S. H. Ko, "Digital Selective Growth of a ZnO Nanowire Array by Large Scale Laser Decomposition of Zinc Acetate," Nanoscale, 5(9), 3698-3703, 2013. 

K. Mahmood, H. W. Kang, R. Munir, H. J. Sung, "A Dual-Functional Double-Layer Film with Indium-Doped ZnO Nanosheets/Nanoparticles Structured Photoanodes for Dye-Sensitized Solar Cells," RSC Advances, 3, 25136-25144, 2013. 

K. Mahmood, R. Munir, H. W. Kang, H. J. Sung, "An Atmospheric Pressure-Based Electrospraying Route to Fabricate Multi-Applications Bilayer (AZO/ITO) Films," RSC Advances, 3, 25741-25751, 2013. 

J. Yeo, S. Hong, M. Wanit, H. W. Kang, D. Lee, C. P. Grigoropoulos, H. J. Sung, S. H. Ko, "Rapid, One-Step, Digital Selective Growth of ZnO Nanowires on 3D Structures using Laser Induced Hydrothermal Growth," Advanced Functional Materials, 23(26), 3316-3323, 2013. 

K. Mahmood, H. W. Kang, S. B. Park, H. J. Sung, "Hydrothermally Grown Upright-Standing Nanoporous Nanosheet of Iodine-Doped ZnO (ZnO:I) Nanocrystallites for a High Efficiency Dye-Sensitized Solar-Cell," ACS Applied Materials & Interfaces, 5, 3722-3730, 2013. 

D. Y. Choi, H. W. Kang, H. J. Sung, S. S. Kim, "Annealing-Free, Smooth, Flexible Silver Nanowire/Polymer Composite Electrodes via a Continuous Two-Step Spray-Coating Method," Nanoscale, 5(3), 977-983, 2012. 

Y. J. Jeon, H. W. Kang, S. H. Ko, H. J. Sung, "Pattern Analysis of Aligned Nanowires in a Microchannel," Measurement Science and Technology, 24(3), 035303, 2013.

C. Yun, J. Choi, H. W. Kang, M. Kim, H. Moon, H. J. Sung, S. Yoo, "Digital-Mode Organic Vapor-Jet Printing (D-OVJP): Advanced Jet-on-Demand Control of Organic Thin-Film Deposition," Advanced Materials, 24, 2857-2862, 2012.

H. W. Kang, C. Yun, S. Yoo, S. H. Ko, H. J. Sung, "Effect of Carrier Gas Temperature on Pentacene Thin Film Formation by Organic Vapor-Jet Printing Techniques," Thermochimica ACTA, 542, 74-79, 2012.

S. Kim, H. W. Kang, K. H. Lee, H. J. Sung, "Effect of Hydrophobic Microstructured Surface on Conductive Ink Printing," Journal of Micromechanics and Microengineering, 21, 095026, 2011.

H. W. Kang, J. Yeo, J. O. Hwang, S. Hong, P. Lee, S. Y. Han, J. H. Lee, Y. S. Rho, S. O. Kim, S. H. Ko, H. J. Sung, "Simple ZnO Nanowires Patterned Growth by Microcontact Printing for High Performance Field Emission Device," Journal of Physical Chemistry C, 115(23), 11435-11441, 2011.

S. H. Ko, D. Lee, H. W. Kang, K. Nam, J. Yeo, S. Hong, C. P. Grigoropoulos, H. J. Sung, "Nano-Forest of Hydrothermally Grown Hierarchical Zno Nanowires for a High Efficiency Dye-Sensitized Solar Cell," Nano Letters, 11(2), 666-671, 2011.

S. H. Kim, H. W. Kang, K. H. Lee, H. J. Sung, “Effect of Micro Surface Structure on Printed Electronics,” Journal of the Korean Society for Precision, 27, 20-25, 2010.

C. Yun, H. Moon, H. W. Kang, M. Kim, H. J. Sung, S. Yoo,"High Performance Pentacene Thin-Film Transistors Fabricated by Organic Vapor-Jet Printing," IEEE Electron Device Letters, 31(10), 1305-1307, 2010. 

H. W. Kang, H. J. Sung, T. M.. Lee, D. S. Kim, C. J. Kim, "Liquid Transfer between Two Separating Plates for Micro-Gravure-Offset Printing," Journal of Micromechanics and Microengineering, 19, 015025, 2009.

D. H. Kang, H. W. Kang, "Prediction of Surface Roughness for Modeling Pressure Drop in Porous Nanofiber Membrane using the Developed CNN Algorithm," Proceedings of the Korean Society of Mechanical Engineers Fluid Engineering Division, Seoul, Korea, May 17-19, 2023.

N. K. Kim, D. H. Kang, H. W. Kang, "Optimizing Portable Air Cleaner Positioning with Artificial Intelligence Using Room Layout Images," Proceedings of the Korean Society of Mechanical Engineers Fluid Engineering Division, Seoul, Korea, May 17-19, 2023.

B. W. Kim, H. W. Kang, "Prediction of Friction Factor in 180-degree Bend through Artificial Intelligence Technology," Proceedings of the Korean Society of Mechanical Engineers Fluid Engineering Division, Seoul, Korea, May 17-19, 2023.

M. L. Wang, H. W. Kang, "Cooling Channel Design for Injection Molding via 2D Multi-Objective Topology Optimization – A Study on Spherical castings" Proceedings of the Korean Society of Mechanical Engineers Fluid Engineering Division, Seoul, Korea, May 17-19, 2023.

L. J. Zheng, H. W. Kang, "Dual Biomimetic Thorn with Cone Structure and Hybrid Wettability for Efficient Fog Harvesting," Proceedings of the Korean Society of Mechanical Engineers Fluid Engineering Division, Seoul, Korea, May 17-19, 2023.

W. Y. Cho, B. W. Kim, H. W. Kang, "Analysis of Mechanical Ventilation System Characteristics for Gaseous Materials Reductions in Livestock Building," The Korea Society of Visualization, Daejeon, Korea, December 1-2, 2022.

B. W. Kim, W. Y. Cho, H. W. Kang, "Analysis of Physical Characteristics of Pressure Drop in a Perpendicular Bend using Artificial Intelligence," The Korea Society of Visualization, Daejeon, Korea, December 1-2, 2022. 

I. H. Kim, H. W. Kang, "Analysis and Predictions of Boundary Characteristic for Contact Angle using AI Algorithm," The Korea Society of Mechanical Engineers Annual Meeting, Jeju, Korea, November 9-12, 2022.

L. J. Zheng, D. H. Kang, H. W. Kang, "Stacked Hydrophilic Fibers Porous Surfaces Enables Self-water Supply Evaporative Cooling to Improve Thermoelectric Output Capability," The Korean Society for Precision Engineering 2022 Autumn conference, Daegu, Korea, October 19-21, 2022.

D. H. Kang, H. W. Kang, "Fabrication Process of Layer-by-layer Stacked Nanofiber Web for Enhancing Electric Potential Difference," The Korean Society for Precision Engineering 2022 Autumn conference, Daegu, Korea, October 19-21, 2022.

B. W. Kim, H. W. Kang, "Prediction of an Agricultural Production Yield based on Regional Climate and Agroecosystem," The Korea Solar Energy Society, Jeju, Korea, October 19-21, 2022.

I. H. Kim, H. W. Kang, "Development of Prediction Model for Algal Bloom Generation based on Solar Irradiance Data," The Korea Solar Energy Society, Jeju, Korea, October 19-21, 2022.

Z. L. Jun, H. W. Kang, "Utilizing a Novel Passive Evaporative Cooling Technology to Improve Heat Recovery Performance of Thermoelectric Generators," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

M. L. Wang, H. W. Kang, "Implementation of Thermal-load based Multiphysics Topology Optimization in 3D Conformal Cooling Channel Design Procedure Using Pseudo-density Method," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

B. W. Kim, H. W. Kang, "Evaluation of Flow Resistance Prediction Performance of Neural Network Model Depending on Reynolds Number Preprocessing," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

N. K. Kim, D. H. Kang, H. W. Kang, "Predicting Air Change Efficiency of Air Purifier using Convolutional Neural Network," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

D. H. Kang, H. W. Kang, "Modeling of Inertial-induced Microfluidic Flow Switch in the Form of Interlocking Modular Block," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

W. Y.Cho, H. W. Kang, "Airflow Control in Dairy Cattle Building for Gaseous Material Reduction," The 12th National Congress on Fluids Engineering, Changwon, Korea, June 22-24, 2022.

D. H. Kang, H. W. Kang, "Geometric Shape Effect of Microfluidics Component in Disk Platform for Micro-Volume Liquid Control,"  The Korean Society of Visualization, Incheon, Korea, May 19-20, 2022.

N. K. Kim, D. H. Kang, H. W. Kang, "Proposal of an Artificial Intelligence Model for Estimating Air Cleaning Characteristics Depending on the Location of Air-cleaning Devices," The Korean Society of Visualization, Incheon, Korea, May 19-20, 2022.

M. L. Wang, D. H. Kang, N. K. Kim, Z. L. Jun, H. W. Kang, "A Study Of Optimal Cooling Channel Layouts With Lower Pressure Drop and Higher Thermal Dissipation In Injection Molding Process Via Thermal-Load Based Topology Optimization," The Korean Society of Visualization, Incheon, Korea, May 19-20, 2022.

D. H. Kang, H. W. Kang, “Piezoelectric Charge Generation Characteristics on PVDF Nanofiber Membrane in an Environment that Mimics Human Breathing for Air Filter Media Application,” The 24th KMEMS conference, 2022.

L. J. Zheng, D. H. Kang, N. K. Kim, M. L. Wang, H. W. Kang, “Hydrophilic Fiber-stacked Microstructure Enables Passive Evaporative Cooling to Enhance Thermoelectric Output Performance,” The 24th KMEMS conference, 2022.

D. H. Kang, N. K. Kim, H. W. Kang, “Self-charging Mask Filter fabrication via Multi-stacked PVDF Nanofiber Membrane on PA6 Mesh Substrate for the High Efficient PM0.3 Filtration,” Nature conferences: Waste Management and Valorisation for a Sustainable Future, Online, October 26-28, 2021.

L. J. Zheng, H. W. Kang, “Combined Heat Sink and Water Film Evaporative Cooling to Enhance the Performance of the Thermoelectric Generator,” Applied Energy Symposium: MIT A+B, Online, August 11-13, 2021.

L. J. Zheng, H. W. Kang, “Research of Improve Waste Heat Recovery Efficiency in Thermoelectric Generator with Passive Evaporative Cooling Heat Sink,” Virtual Conference on Thermoelectircs, Online, July 20-22, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “High-speed VEGF Recognition via Microbead-Based Fluorescence-linked Immunosorbent Assay Using the 3D-printed Micro Incubation Chamber in the Lab-on a-Disk,” MRS Virtual Spring Meeting & Exhibit, Online, April 18-23, 2021.

N. W. You, B. W. Kim, H. W. Kang, “A Study on Driver Image Data Acquisition System for Autonomous Driving Safety,” KSAE Fall conference, 2021.

N. K. Kim, D. H. Kang, H. W. Kang, “Indoor Flow Control using Artificial Intelligence for Improvement of Air Change Efficiency,” KOSIE Annual conference, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “Movement Analysis of Microbead for Controlling Antibody-antigen Binding Environment in the Centrifugal Microfluidic System,” The 23rd Korean MEMS Conference, 2021.

D. H. Kang, N. K. Kim, H. W. Kang, “Improved Efficiency of Photo-Induced Electron Detection under UV light source by ZnO Nanowire Array on Aligned PVDF-TrFE Nanofiber Film,” MRS Virtual Spring/Fall Meeting & Exhibit, Online, November 27 – December 4, 2020.

D. H. Kang, N. K. Kim, H. W. Kang, “Serial Fluidic Control using Slope Valve in Customized Microfluidic Lab-on-a-Disk Platform,” International Symposium on Precision Engineering and Sustainable Manufacturing, Online, November 15-18, 2020.

N. K. Kim, H. W. Kang, “Removal of Indoor Particulate Matter using Ventilation System Control based on Artificial Neural Network for Indoor Air Quality,” The 16th Conference of the International Society of Indoor Air Quality & Climate, Online, November 1-5, 2020.

L. J. Zheng, D. H. Kang, N. K. Kim, H. W. Kang, “Cotton-based Microfluidic Evaporator to Enhance the Performance of a Thermoelectric Device,” The 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Online, October 4-9, 2020.

L. J. Zheng, D. H. Kang, N. K. Kim, H. W. Kang, “Combine Evaporative Cooling Technology with Thermoelectric Generator to Improve the Efficiency of Waste Heat Recovery,” Applied Energy Symposium MIT A+B, Online, August 13-14, 2020. 

B. W. Kim, H. W. Kang, “Artificial Intelligence-based the Physical Characteristic Prediction of Fluid Flow in Fluid Systems,” KSME Annual Meeting, 2020.

N. K. Kim, D. H. Kang, H. W. Kang, “Ventilation Control Strategies based on Artificial Neural Network for Efficient Dilution of Indoor Fine Dust,” KSME Annual Meeting, 2020.

D. H. Kang, N. K. Kim, H. W. Kang, “Porous Film Capable of Maintaining Surface Voltage by Geometry Control in Nanoscale for Dust Collection Filter Applications,” KSME Annual Meeting, 2020.

D. H. Kang, N. K. Kim, H. W. Kang, “Fabrication of 3D Printed Incubation Chamber Layer within Microfluidic System for VEGF Antigen Detection Based on Immune Response,” KSME Annual Meeting, 2020.

Do. H. Kang, N. K. Kim, H. W. Kang, “Enhanced Performance of Photo-induced Electrons on Zinc Oxide through the Nano Composite Structure,” The 22nd Korean MEMS Conference, 2020.

N. K. Kim, D. H. Kang, H. W. Kang, “Surface Coating Phenomena depending on the Viscosity and Surface Tension of Coating Fluid during Thin Film Coating Process,” The 22nd Korean MEMS Conference, 2020.

N. W. You, D. H. Kang, J. Y. Park, H. W. Kang, “Fabrication of PVDF Porous Layer for High Particular Matter Filtration Efficiency by Surface Friction through Film Bending,” The 22nd Korean MEMS Conference, 2020.

L. J. Zheng, S. M. Lim, D. H. Kang, N. K. Kim, W. Lee, H. W. Kang, “Improve the Performance of Thermoelectric Device by Utilizing Polydopamine Coated Composite Film-evaporator,” The 22nd Korean MEMS Conference, 2020.

J. Y. Park, N. K. Kim, H. W. Kang, “Cooling Characteristic of Micro-scale Cooling Channel depending on Flow Rate in Injection Molding,” The 22nd Korean MEMS Conference, 2020.

K. Kwon, H. W. Kang, H. Eom, “Catalyst-decorated CNT Heater System for VOCs Decomposition,” International Symposium on Precision Engineering and Sustainable Manufacturing, Da Nang, Vietnam, July 10-13, 2019.

D. H. Kang, N. K. Kim, H. W. Kang, “Enhanced Performance of Photo-induced Electrons from Zinc Oxide on the Electrospun Fiber based Composite Structure,” International Symposium on Precision Engineering and Sustainable Manufacturing, Da Nang, Vietnam, July 10-13, 2019.

L. J. Z., D. H. Kang, N. K. Kim, H. W. Kang, “Experimental Investigation of the Influence of the Relatively Humidity on Water Film Evaporative Cooling Thermoelectric Device,” International Symposium on Precision Engineering and Sustainable Manufacturing, Da Nang, Vietnam, July 10-13, 2019.

J. Y. Park, N. K. Kim, D. H. Kang, H. W. Kang, “3D Printed Fluidic Channel for Rapid and Uniform Cooling of Injection Molding,” International Symposium on Precision Engineering and Sustainable Manufacturing, Da Nang, Vietnam, July 10-13, 2019.

N. K. Kim, D. H. Kang, H. W. Kang, “Moisture Collection Film Surface with High Porous Fiber Layer using the Electrospun Polyvinylidene-Fluoride and Zinc-Oxide Nanowire,” The 3rd International Conference on Applied Surface Science, Pisa, Italy June 17-20, 2019.

D. H. Kang, N. K. Kim, L. J. Zheng, H. W. Kang, “Optimized Fabrication Process of Electrospun Nanofiber Film using Circular Electrode for Multifunctional Filter Application,” Materials Research Society Spring Meeting & Exhibit, Arizona, USA, April 22-26, 2019.

N. K.Kim, D. H. Kang, L. J.Zheng, H. W. Kang, “Manufacturing Biomimetic Surface with ZnO-Ag Hierarchical Nanostructures for High Efficiency Water Harvesting,” Materials Research Society Spring Meeting & Exhibit, Arizona, USA, April 22-26, 2019.

L. J. Zheng, D. H. Kang, N. K. Kim, H. W. Kang, “Theorical Analysis of Evaporative Cooling to Enhance the Performance of Thermoelectric Device,” Materials Research Society Spring Meeting & Exhibit, Arizona, USA, April 22-26, 2019.

D. H. Kang, H. W. Kang, “Batch Analysis for Fluorescence Labeled Bead Detection by Centrifugal Disk with Three-dimensional Microfluidic Channels,” KSPE Autumn Conference, 2019.

D. H. Kang, N. K. Kim, N. W. You, J. Y. Park, H. W. Kang, “Aligned Electrospun PVDF-TrFE Nanofiber-Based Zinc Oxide Nanowire Hierarchical Structure Fabrication for High Sensitive Optical Sensor Application,” KSPE Autumn Conference, 2019.

D. H. Kang, N. K. Kim, H. W. Kang, “Optical Sensor Fabrication using the Electrospun Nanofiber Film with Zinc Oxide Nanowire Composite Structure,” KFPE Annual Meeting, 2019.

N. K. Kim, D. H. Kang, H. W. Kang, “Moisture Collection Surface Fabrication using the Nanostructure on the Polymer based Flexible Substrates,” KFPE Annual Meeting, 2019.

D. H. Kang, N. K. Kim, H. W. Kang, “Electrostatic Fields Analysis for Uniform Thickness Electrospun Film Fabrication with Circular Electrode for Microfluidic Filter Application,” MicroTAS, Kaohsiung, Taiwan, November 11-15, 2018.

N. K. Kim, D. H. Kang, H. W. Kang, “Water Condensation Behaviors of Zinc Oxide Nanowires on the Electrospun PVDF Nanofiber for Efficient Fog Harvesting,” MicroTAS, Kaohsiung, Taiwan, November 11-15, 2018.

D. H. Kang, H. W. Kang, H. T. Lim, H. S. Yoon, B. W. Kwon, S. D. Kim, “FEM Analysis of Double Legs Bracket to Reduce the Local Stress Concentration for Automobile Applications,” The 6th IIAE International Conference on Industrial Application Engineering, Okinawa, Japan, March 27-31, 2018.

D. H. Kang, H. W. Kang, H. T. Lim, M. Chang, J. M. Jung, C. H. Park, “Natural Convection Heat Dissipation Analysis for High Current Switching Modules,” The 6th IIAE International Conference on Industrial Application Engineering, Okinawa, Japan, March 27-31, 2018.

D. H. Kang, N. K. Kim, L. J. Zheng, H. W. Kang, “Controllable Geometry of ZnO Nanowire Array on PVDF-TrFE based Electrospun Fiber Surface in Hydrothermal Method for UV Sensor Application,” KSME Fall Annual Meeting, 2018.

L. J. Zheng, D. H. Kang, N. K. Kim, H. W. Kang, “Theoretical Analysis for a Thermoelectric Device Performance with Thomson Effect,” KSME Fall Annual Meeting, 2018.

N. K. Kim, D. H. Kang, L. J. Zheng, H. W. Kang, “Characteristics of Surface Wettability in Microchannel by Zinc Oxide Nanostructures Formed on Channel Surface,” KSME Fall Annual Meeting, 2018.

N. K. Kim, H. W. Kang, “An Efficient Water Collection on a Superhydrophilic Surface with Patterned Hydrophobic Regions Using Hierarchical Nano Structures,” International Symposium on Green Manufacturing and Applications, Gyeongju, Korea, June 27 – July 1, 2017.

D. H. Kang, H. W. Kang, “Analysis an Electric Field during Electrospinning Process with Hollow Circular Collector,” International Symposium on Green Manufacturing and Applications, Gyeongju, Korea, June 27 – July 1, 2017.

D. H. Kang, N. K. Kim, H. W. Kang, “Manufacturing Zeolite/PVDF Composite Nanofiber Stacked Film by Electrospinning Process for Surface Wettability Controlling,” Materials Research Society Spring Meeting & Exhibit, Arizona, USA, April 17-21, 2017.

N. K. Kim, D. H. Kang, H. W. Kang, “Manufacturing Hybird Surfaces of Perhydrophilic-hydrophobic Patterned with ZnO Nanowire and ZnO Nanowire-Ag Nanoparticle Hierarchical Structures for Fog Harvesting”, Materials Research Society Spring Meeting & Exhibit, Arizona, USA, April 17-21, 2017.

W. S. Yang, H. W. Kang, “Effect of Functional Material Properties on Surface Uniformity in Coating Process Using Computational Fluid dynamics,” KSMTE Annual Autumn Conference, 2017.

N. K. Kim, H. W. Kang, “Numerical Study on the Fine Dust Removal Efficiency of Range Hood by Conditions of Chimney Type Frame Shape for Kitchen Ventilation,” KSMTE Annual Autumn Conference, 2017.

D. H. Kang, H. W. Kang, “The Influence of Fiber Alignment of Electrospun Nanowire for Enhancement of Electrical Property using the Wire based Electrode,” KSMTE Annual Autumn Conference, 2017.

D. H. Kang, H. W. Kang, “Porous Multilayer Formation using Printable Electronics by Electrospinning Method,” KSMTE Annual Autumn Conference, 2017.

N. K. Kim, H. W. Kang, “Study on the Pinning Effect of Coating Fluid Depending on the Surface Energy,” KSME Fall Annual Meeting, 2017.

N. K. Kim, J. E. Kim, M. R. Jang, Y. I. Kim, H. W. Yun, H. W. Kang, “Fabrication of Zinc Oxide Nanowires on the Electrospun PVDF Film,” KSME Fall Annual Meeting, 2017.

D. H. Kang, H. W. Kang, “Analysis of Mechanical Vibration Property of Electronic Part Connecting Bracket,” KSME Fall Annual Meeting, 2017.

D. H. Kang, H. W. Kang, “Water Absorption Characteristics of Zeolite Embedded PVDF fiber Fabricated by Electrospinning Process,” KSME Fall Annual Meeting, 2017.

D. H. Kang, H. T. Lim, S. H. Wi, H. W. Kang, “Analysis of Heat Dissipation Characteristics according to Operating Environment for Durability of High-current Power Switching Device,” KSPE Spring Conference, 2017.

N. K. Kim, H. W. Kang, “Fog Harvest Surface Fabrication by Zinc Oxide-Silver Nanostructures,” KSPE Spring Conference, 2017.

D. H. Kang, H. W. Kang, “Structural Optimization of Electronic Part Holder depending on the Number of Supporters by using Vibration Analysis Method,” KSPE Spring Conference, 2017.

D. H. Kang, H. W. Kang, “A Study of the Laminating Electrospun Film on the Non-planar Surface through Transferring Method in Electrospinning Process,” KSPE Spring Conference, 2017.

Y. S. Jung, N. K. Kim, M. R. Jang, H. W. Kang, “Surface Coating Phenomena depending on the Substrate Contact Angle during Spray Coating Process,” KSPE Spring Conference, 2017.

Y. T. Hwang, H. W. Kang, “Numerical Study on Fluid Channel Shape with Uniform Flow Field for Real-time Optical Analysis using 3-D Microfluidic System,” KSPE Spring Conference, 2017.

N. K. Kim, H. W. Kang, "Surface Wettability Control by Changing Silver Nanoparticle Size on Zinc Oxide Nanowires for Hydrophobic Surface Generation," MicroTAS 2016, Ireland, October 11, 2016.

N. K. Kim, H. W. Kang, "Study on Aligned Patterning of ZnO Nanowires and Protein using Micro Contact Printing," International Symposium on Green Manufacturing and Applications, Bali, Indinesia, June 22, 2016.

D. H. Kang, H. W. Kang, "Surface Energy Control by Embedding Zeolite in Electrospinning Process PVDF Films," International Symposium on Green Manufacturing and Applications, Bali, Indinesia, June 22, 2016.

W. S. Yang, N. K. Kim, H. W. Kang, “Micro Contact Printing for Fabricated ZnO Nanostructure on SU-8 Microstructure Surface,” KSPE Spring Conference, 2016.

D. H. Kang, H. W. Kang, “Electrospun PVDF film with Controllable Layer Thickness for Filter Application,” KSPE Spring Conference, 2016.

N. K. Kim, H. W. Kang, “Study on the Contact Angle Control of Solid Surface using the Hierarchical Nano Structure,” KSPE Spring Conference, 2016.

D. H. Kang, S. H. Park, H. W. Kang, “Contact Angle Control with PVDF Fiber Morphology by Electrospun Distance and Zeolite Ratio Variation,” KSPE Spring Conference, 2016.

D. H. Kang, H. W. Kang, “Zeolite Embedded PVDF Film Generation using Electrospinning Technique and Its Applications,” KSMTE Annual Spring Conference, 2016.

D. H. Kang, M. K. Bae, N. K. Kim, H. W. Kang, “A Study on the PVDF Thin Film on a Pipe Section using Freestanding Characteristic,” The 18th Korean MEMS Conference, 2016.

D. H. Kang, H. W. Kang, "Catalytic Filter by Electrospinning Nanofibers for Purification of Exhaust gas," International Conference on Advanced Automotive Technology, Korea, November 11, 2015.

T. H. Kwon, H. W. Kang, "Computational Analysis of Automotive Exhaust System for Optimal Design of Waste Heat Recovery Equipment," International Conference on Advanced Automotive Technology, Korea, November 11, 2015.

J. Lim, H. W. Kang, "Hierarchical Nanostructure Fabrication of Ag Nanoparticle on ZnO Nanowire for High Efficiency SERS based," MRS Spring Meeting, San Francisco, USA, April 8, 2015.

T. H. Kwon, M. K. Bae, N. K. Kim, H. W. Kang, “Microcontact Printing with Vacuum Pressure for Aligned Patterning of Nano and Biochemical Materials,” Korea Society for Precision  Engineering Autumn Conference, 2015.

D. H. Kang, M. K. Bae, T. H. Kwon, H. W. Kang, “Self-assembling PVDF Thin Film on a Circular Hollow Section,” Korea Society for Precision  Engineering Autumn Conference, 2015.

M. K. Bae, T. H. Kwon, D. H. Kang, H. W. Kang, “Nanoparticle Patterning inside of Microfluidic Channel for Multiple Materials Detection,” Korea Society for Precision  Engineering Autumn Conference, 2015.

L. Pandey, H. W. Kang, "Surface plasmon coupling of Ag on different dielectric thin films," International Conference on Microelectronics and Plasmon Technology, Korea, July 9, 2014.

D. Y. Choi, H. W. Kang, H. J. Sung, and S. S. Kim, "Fabrication of Flexible Silver Nanowire-Polymer Composite Transparent Electrodes by Aerosol Spray Coating Method," 8th Asian Aerosol Conference, Sydney, Australia, December 2-5, 2013.

G. Destgeer, S. Im, J. H. Jung, H. W. Kang, K. H. Lee, M. A. Ansari, A. Alazzam, and H. J. Sung, "Particle Separation, Chemical Gradient Control and Micromixing via Focused Travelling Surface Acoustic Waves (F-TSAW)," The 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (microTAS 2013), Freiburg, Germany, October 27-31, 2013.

Y. S. Oh, D. Y. Choi, J. Y. Son, B. Y. Kim, H. W. Kang, C. B. Chang, J. T. Moon, S. S. Kim, and H. J. Sung, "Breakup Behaviour of Droplets in a Molten Metal Jet", 4th International Conference on Flexible and Printed Electronics, Jeju, Korea, September 11-13, 2013.

H. W. Kang, J. Leem, S. H. Ko, and H. J. Sung, "Microfluidic Reaction System based on Efficient Mixing Technique for Continuous ZnO Nanoparticle Manufacturing," 2013 MRS Spring Meeting, San Francisco, USA, April 1-5, 2013.

D. Y. Choi, H. W. Kang, H. J. Sung and S. S. Kim, “A Study on the Fabrication of Random Metal Mesh Electrodes Embedded in Polymer,” Proceedings of the Korean Aerosol Conference, 2013.

J. Y. Leem, H. W. Kang, S. H. Ko and H. J. Sung, “Silver Nanoparticle Patterning Method using Microfluidic Channel,” The 13th Korean MEMS conference, 2013.

H. W. Kang, J. Leem, S. Y. Yoon, S. H. Ko, and H. J. Sung, "Continuous and Large-Area Nano- and Bio- Materials Aligned Patterning by Vacuum-Assisted Micro Contact Printing," 2012 MRS Fall Meeting, Boston, USA, November 25-30, 2012.

J. Leem, H. W. Kang, S. H. Ko, and H. J. Sung, "Silver Thin Film Formation by Microfluidic System for Raman Spectroscopy Biomedical Sensing," 2012 MRS Fall Meeting, Boston, USA, November 25-30, 2012.

H. W. Kang, J. Yeo, S. Hong, H. J. Sung, and S. H. Ko, "Large-Area Patterning of ZnO Nanowires by Micro Contact Printing (uCP) for Field-Emission Application," 2011 MRS Spring Meeting, San Francisco, USA, April 25-29, 2011.

H. W. Kang, S. H. Ko, D. Lee, K. Nam, H. J. Sung, and C. P. Grigoropoulos, "Multi-Generation Hierarchical ZnO Nanowire Growth for High Efficiency DSSC Fabrication," 2011 MRS Spring Meeting, San Fransisco, USA, April 25-29, 2011.

S. Hong, J. Yeo, H. W. Kang, J. Lee, and S. H. Ko, "Laser-assisted Micropatterning of Zinc Oxide Nanowires," 2011 MRS Spring Meeting, San Fransisco, USA, April 25-29, 2011.

J. Lee, J. Yeo, H. W. Kang, S. Hong, and S. H. Ko, "Novel High Aspect Ratio Ag Nanowire Solverthermal Synthesis, Fluidic Assembly and Characterization," 2011 MRS Spring Meeting, San Fransisco, USA, April 25-29, 2011.

S. H. Im, H. W. Kang, S.Y. Yoon and H. J. Sung, “Photoresist Thermal Reflow Bonding for MEMS Application,” Proceedings of the Korean Society of Precision Engineering Conference, 2011.

S. Y. Han, Y. S. Rho, J. H. Lee, H. B. Lee, M. Wanit, J. Y. Yeo, H. W. Kang, S. J. Hong, H. J. Sung and S. H. Ko, “3D Metal Microstructure Fabrication by Inkjet Printing of Metal Nanoparticle Ink,” Proceedings of the Korean Society of Precision Engineering Conference, 2011.

J. Y. Yeo, H. W. Kang, S. J. Hong, H. J. Sung and S. H. Ko, “Low Temperature Nanomaterial Laser Process Development and Application in Energy Devices,” Proceedings of the Korean Society of Precision Engineering Conference, 2011.

C. Yun, H. W. Kang, H. Moon, M. Kim, H. J. Sung, and S. Yoo, "High-mobility Organic TFTs Fabricated by Organic Vapor-jet printing: Effect of Carrier Gas Temperature and Dielectric Treatment," 8th International Conference on Electroluminescence & Organic Optoelectronics, Ann Arbor, MI, USA, October 17-21, 2010.

C. Yun, H. W. Kang, H. Moon, M. Kim, H. J. Sung, and S. Yoo, "High Mobility Organic TFTs Fabricated by Organic Dry-Jet Printing," 2nd International Workshop on Flexible and Printable Electronics, Muju, Korea, September 8-10, 2010.

D. Choi, H. W. Kang, S. H. Ko, S. S. Kim, and H. J. Sung, "Effect of Annealing Temperature on PEDOT:PSS Thin Film Morphology Coated by a Spray Deposition Method," 2nd International Workshop on Flexible and Printable Electronics, Muju, Korea, September 8-10, 2010.

D. Choi, H. W. Kang, S. S. Kim, and H. J. Sung, "Spray Deposited PEDOT:PSS Thin Film Electrodes by Spray Deposition Method," International Aerosol Conference 2010, Helsinki, Finland, August 29–September 3, 2010.

S. H. Ko, H. W. Kang, J. Yeo, and H. J. Sung, "Flexible Dye-sensitized Solar Cell Fabrication by TiO2 Nanoparticle Laser Processing," 18th International Conference on Photochemical Conversion and Storage of Sola Energy (IPS-18), Seoul, Korea, July 25~30, 2010.

C. Yun, H. W. Kang, H. J. Sung, and S. Yoo, "Drop-on-Demand”" Organic Dry-Jet Printing for Mask-Free, Scalable Fabrication of Organic Devices," International Workshop on Flexible & Printable Electronics 2009, Muju, Korea, November 18-19, 2009.

D. H. Ahmed, H. W. Kang, and H. J. Sung, "Non-Newtonian Effect on Ink Transfer for Gravure-Offset Printing," IEEE International Symposium on Assembly and Manufacturing, Seoul, Korea, November 17-20, 2009.

H. W. Kang, D. Choi, K. H. Lee, and H. J. Sung, "Effects of Sheath Gas Geometry on Aerosol Jet Patterning and Coating," International Conference on Flexible and Printed Electronics, Jeju, Korea, November 11-13, 2009.

S. Kim, H. W. Kang, K. H. Lee, and H. J. Sung, "Effect of Micro Surface Structures on Printing," Large-area Organic & Printed Electronics Convention, Frankfurt, Germany, June 23-25, 2009.

H. W. Kang, S. Kim, and H. J. Sung, "Ink Transfer Process for Contact Printings," Large-area Organic & Printed Electronics Convention, Frankfurt, Germany, June 23-25, 2009.

W. X. Huang, S. H. Lee, H. W. Kang, H. J. Sung, T. M. Lee, and D. S. Kim, "Numerical Simulation of Liquid Transfer between Separating Walls for Modeling Gravure-Offset Printing," The 4th APCOT Conference, Tainan, Taiwan, June 22-25, 2008.

H. W. Kang, T. M. Lee, C. J. Kim, D. S. Kim, J. Gong, and H. J. Sung, "Liquid Transfer Experiment for Micro-Gravure-Offset Printing Depending on The Surface Contact Angle," The 4th APCOT Conference, Tainan, Taiwan, June 22-25, 2008.

H. W. Kang, H. J. Sung, T. M. Lee and S. D. Kim, “Experimental Study of Liquid Transfer at the Micro-gravure-offset Printing by Controlling the Surface Contact Angle,” The Korean Society of Precision Engineering Conference, 2008.

H. W. Kang, W. X. Huang, S. H. Lee, H. J. Sung, T. M. Lee and S. D. Kim, “Parameter Study of Liquid Transfer between Two Plates for Micro-Gravure-Offset Printing,” The Korean Society of Precision Engineering Conference, 2008.

H. W. Kang, W. X. Huang, H. J. Sung, T. M. Lee and D. S. Kim, “Study of Liquid Transfer Process for micro-Gravure-Offset Printing,” Proceedings of the KSME Conference, 2008.

H. C. Choi, T. M. Lee, H. W. Kang, C. Hwan, H. J. Sung, S. D. Kim, “Study on the doctoring for silver ink gravure printing,” The Korean Society of Precision Engineering Conference, 2008.